The tables below list add-on cards and memory tested with the UP1500 under SRM 5.6-19. Only SRM compatibility is recorded: for storage controllers, whether SRM can boot from them. Whether a Linux or BSD driver works is a separate matter.
Standard AGP video cards are available with three different connector variants: 3.3V only, 1.5V only, and dual-voltage. The UP1500's AGP slot has the 3.3V notch, and thus requires that the AGP card accept 3.3V signaling.
Some video card BIOSes are also incompatible with the BIOS emulator in the UP1500's SRM.
| Vendor & Name | Chipset | Memory (MiB) | PCI ID | Voltages | Tester |
|---|---|---|---|---|---|
| SRM initializes the card | |||||
| ATI Rage Pro AGP 2x | Rage Pro | 16 | 1002:4742 | 3.3V | klausman |
| Tyan Tachyon Radeon 9700 Pro | R300 | 128 | 1002:4E44 | 3.3V, 1.5V | mattst88 |
| Club3D Radeon 9800 Pro | R350 | 128 | 1002:4E48 | 3.3V, 1.5V | mattst88 |
| ATI Rage 128 Pro | Rage 128 Pro | 16 | 1002:5046 | 3.3V, 1.5V | martisch |
| ATI Radeon 7000 | RV100 | 32 | 1002:5144 | 3.3V, 1.5V | martisch |
| ATI FireGL 8800 | RV100 | 128 | 1002:5148 | 3.3V, 1.5V | martisch |
| Gigabyte GV-AR64S Radeon 7500 SDR | RV200 | 64 | 1002:5157 | 3.3V, 1.5V | martisch |
| ATI Radeon 7000 VE DDR | RV100 | 64 | 1002:5159 | 3.3V, 1.5V | martisch |
| ATI Rage 128 Pro Ultra | Rage 128 Pro | 32 | 1002:5446 | 3.3V, 1.5V | klausman |
| Matrox G200 AGP | MGA G200 | 8 | 102B:0521 | 3.3V | martisch |
| Matrox G400 MDHA32G | G400 Dual-Head | 32 | 102B:0525 | 3.3V, 1.5V | klausman |
| Matrox Millennium G400DH | G4+MDH4A32G | 32 | 102B:0525 | 3.3V, 1.5V | martisch |
| Matrox Millennium G450DH LX | G45+MDHA16DLXB | 32 | 102B:0525 | 3.3V, 1.5V | martisch |
| Elsa Erazor III LT-A32 | NVIDIA TNT2 | 32 | 10DE:002D | 3.3V, 1.5V | martisch |
| MS-8808 | NVIDIA TNT2 M64 | 32 | 10DE:002D | 3.3V, 1.5V | martisch |
| Elsa GEM32T | GeForce2 MX | 32 | 10DE:0110 | 3.3V, 1.5V | klausman |
| Hercules 3D Prophet 2 MX | GeForce2 MX | 32 | 10DE:0110 | 3.3V, 1.5V | martisch |
| Elsa Gladiac 511TV-Out | GeForce2 MX-400 | 64 | 10DE:0110 | 3.3V, 1.5V | martisch |
| Noname | GeForce2 MX-400 | 64 | 10DE:0110 | 3.3V, 1.5V | martisch |
| Asus V7100 SDR | GeForce2 MX | 32 | 10DE:0110 | 3.3V, 1.5V | martisch |
| PowerGENE CGTS2 | GeForce2 GTS PRO | 64 | 10DE:0151 | 3.3V, 1.5V | martisch |
| NVIDIA Quadro NVS200 | NV17GL | 64 | 10DE:017A | 3.3V, 1.5V | martisch |
| PV-T34K-NAHG | GeForce FX5200 | 128 | 10DE:0322 | 3.3V, 1.5V | martisch |
| MS-8806 Ver1.1 | TNT2 Ultra | 32 | 10DE:? | 3.3V, 1.5V | martisch |
| SRM does not initialize the card | |||||
| Creative CT6710 | Riva TNT2 | 32 | 3.3V | martisch | |
| ATI Xpert 2000 | Rage 128 | 32 | 3.3V | martisch | |
| ATI Rage 2C AGP | Rage 2C | 3.3V | martisch | ||
| ATI All in Wonder Radeon | Radeon 7200 | 32 | 3.3V, 1.5V | martisch | |
| ATI FireGL 2 AGP | RC1000 GT1000 | 64 | 3.3V, 1.5V | martisch | |
| Elsa Erazor III LT G | TNT2 M64 | 32 | 3.3V, 1.5V | martisch | |
| ATI C215R | Rage Pro Turbo | 4 | 3.3V | martisch | |
| ATI Rage 128 | Rage 128 | 32 | 3.3V | martisch | |
| Leadtek WinFast A350XT | GeForce FX5900 XT | 128 | 3.3V, 1.5V | martisch | |
| Vendor & Name | Chipset | PCI ID | Tester |
|---|---|---|---|
| SRM boots from the card | |||
| LSI Logic | 53c810 (rev 23) | 1000:0001 | mattst88 |
| Symbios Logic | 53c8x5 (875, 895) | (multiple) | klausman |
| LSI Logic | 53c895 (rev 02) | 1000:000c | mattst88 |
| Centos CI-4500UW | NCR 53c875 | 1000:000f | martisch |
| DawiControl 2976UW | NCR 53c875 | 1000:000f | martisch |
| Adaptec AHA-2930CU | AIC-7850 | 9004:5078 | mattst88 |
| Adaptec AVA-2904 | AIC-7856T (rev 03) | 9004:5078 | martisch |
| Adaptec AVA-2910C | AIC-7856T (rev 03) | 9004:5078 | martisch |
| Adaptec 2940AU | AIC-7860Q | 9004:6178 | martisch |
| Adaptec 2940/2940U | AIC-7871 | 9004:7178 | martisch |
| Adaptec 2940UW | AIC-7880P | 9004:8178 | martisch |
| Adaptec 2940U2W | AIC-7890AB | 9005:0010 | martisch |
| Adaptec 29160LP | AIC-7892A | 9005:0080 | martisch |
| Adaptec 29160 | AIC-7892A | 9005:0080 | martisch |
| Adaptec 39160 | AIC-7899A | 9005:00c0 | martisch |
| SRM cannot boot from the card | |||
| DPT/Adaptec | SmartRAID V/I2O RAID | 1044:a401 | klausman |
| Mylex | AcceleRAID 252/160/170 (aka DAC960) | 1069:0050 | klausman |
| QLogic | ISP1080 | 1077:1080 | martisch |
The Mylex AcceleRAID sold with Compaq Alpha systems carries different firmware, which cannot be flashed onto the PC version of the card.
| Vendor | Model | Speed | Latency | Size | Tester |
|---|---|---|---|---|---|
| Works | |||||
| Samsung | M312L2828DTO-CA2 | PC2100 | CL2 | 1 GiB | mattst88 |
| Samsung | M312L2828ETO-CA2 | PC2100 | CL2 | 1 GiB | mattst88 |
| Samsung | M312L2828DTO-CB0Q0 | PC2100 | CL2.5 | 1 GiB | klausman |
| Kingston | KVR400D8R3A/1G | PC3200 | CL3 | 1 GiB | klausman |
lspci -nnIn SRM:
show config | moreBus 02 Slot 05: 0525102B/217D102B0525102B/217D102B translates to 102B:0525 as the card's full ID