SV: [suse-axp] How to configure X on a Multia?


Subject: SV: [suse-axp] How to configure X on a Multia?
From: Lennart Börjeson (LennartB@cinnober.com)
Date: Thu Oct 07 1999 - 10:46:04 PDT


This is the one I eventually ended up with (not the exact one Kris Carlier
supplied me with, that one worked, but I've trimmed it down somewhat):

# SaX autogenerated XF86Config file
# This file was generated from the SaX
# ---and manually edited by LenartB
# Version: 2.8 - sax@suse.de
# Date: Thu Oct 7 14:50:18 CEST 1999
# Xserver:TGA
# MouseVendor:DEC
# MouseName:PC7XS-CA
# RamDac:60
# Dac8:60
# Dac16:
# Dac24:
# Dac32:

Section "Files"
  RgbPath "/usr/X11R6/lib/X11/rgb"
  FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
  FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
  FontPath "/usr/X11R6/lib/X11/fonts/Type1"
  FontPath "/usr/X11R6/lib/X11/fonts/URW"
  FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
  FontPath "/usr/X11R6/lib/X11/fonts/misc"
  FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
  FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
EndSection

Section "ServerFlags"
  AllowMouseOpenFail
EndSection

Section "Module"
EndSection

# This section is no longer supported
# See a template below
# Section "XInput"
# EndSection

Section "Keyboard"
   LeftAlt Meta
  Protocol "Standard"
  XkbRules "xfree86"
  XkbModel "pc102"
  XkbLayout "se"
EndSection

Section "Pointer"
  Protocol "PS/2"
  Device "/dev/mouse"
# SampleRate 60
# BaudRate 1200
EndSection

Section "Monitor"
  Identifier "VCR21"
  VendorName "DEC"
  ModelName "VRC21-HA"
  HorizSync 30-64
  VertRefresh 50-100
# 640x400 @ 70 Hz, 31.5 kHz hsync
Modeline "640x400" 25.175 640 664 760 800 400 409 411 450
# 640x480 @ 60 Hz, 31.5 kHz hsync
Modeline "640x480" 25.175 640 664 760 800 480 491 493 525
# 800x600 @ 56 Hz, 35.15 kHz hsync
ModeLine "800x600" 36 800 824 896 1024 600 601 603 625
# 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync
#Modeline "1024x768" 44.9 1024 1048 1208 1264 768 776 784 817
Interlace

# 640x480 @ 72 Hz, 36.5 kHz hsync
Modeline "640x480" 31.5 640 680 720 864 480 488 491 521
# 800x600 @ 60 Hz, 37.8 kHz hsync
Modeline "800x600" 40 800 840 968 1056 600 601 605 628 +hsync
+vsync

# 800x600 @ 72 Hz, 48.0 kHz hsync
Modeline "800x600" 50 800 856 976 1040 600 637 643 666 +hsync
+vsync
# 1024x768 @ 60 Hz, 48.4 kHz hsync
Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777 806 -hsync
-vsync

# 1024x768 @ 70 Hz, 56.5 kHz hsync
Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777 806 -hsync
-vsync
# 1280x1024 @ 87 Hz interlaced, 51 kHz hsync
#Modeline "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165
Interlace

# 1024x768 @ 76 Hz, 62.5 kHz hsync
Modeline "1024x768" 85 1024 1032 1152 1360 768 784 787 823
# 1280x1024 @ 61 Hz, 64.2 kHz hsync
Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054

# 1280x1024 @ 74 Hz, 78.85 kHz hsync
Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064

# 1280x1024 @ 76 Hz, 81.13 kHz hsync
Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064

# Low-res Doublescan modes
# If your chipset does not support doublescan, you get a 'squashed'
# resolution like 320x400.

# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
Modeline "320x200" 12.588 320 336 384 400 200 204 205 225
Doublescan
# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
Modeline "320x240" 12.588 320 336 384 400 240 245 246 262
Doublescan
# 320x240 @ 72 Hz, 36.5 kHz hsync
Modeline "320x240" 15.750 320 336 384 400 240 244 246 262
Doublescan
# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
ModeLine "400x300" 18 400 416 448 512 300 301 602 312
Doublescan
# 400x300 @ 60 Hz, 37.8 kHz hsync
Modeline "400x300" 20 400 416 480 528 300 301 303 314
Doublescan
# 400x300 @ 72 Hz, 48.0 kHz hsync
Modeline "400x300" 25 400 424 488 520 300 319 322 333
Doublescan
# 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
ModeLine "480x300" 21.656 480 496 536 616 300 301 302 312
Doublescan
# 480x300 @ 60 Hz, 37.8 kHz hsync
Modeline "480x300" 23.890 480 496 576 632 300 301 303 314
Doublescan
# 480x300 @ 63 Hz, 39.6 kHz hsync
Modeline "480x300" 25 480 496 576 632 300 301 303 314
Doublescan
# 480x300 @ 72 Hz, 48.0 kHz hsync
Modeline "480x300" 29.952 480 504 584 624 300 319 322 333
Doublescan

EndSection

Section "Device"
  Identifier "TGA"
  VendorName "DEC"
  BoardName "ZLXp-E1"
# VideoRam 1024
# MemBase 0x02000000
EndSection

Section "Screen"
  Driver "Accel"
  Device "TGA"
  Monitor "VCR21"
  DefaultColorDepth 8
  SubSection "Display"
    Depth 8
    Modes "1024x768"
    ViewPort 0 0
  EndSubSection
EndSection

> ----------
> Från: Izaak Bozof[SMTP:izaak.bozof@ins.com]
> Skickat: den 7 oktober 1999 17:58
> Till: Lennart Börjeson; Suse-Axp (E-mail)
> Angående: RE: [suse-axp] How to configure X on a Multia?
>
> can you post this? thanks
>
> At 10:52 a 10/7/99 , Lennart Börjeson wrote:
> >Thank you, that one did it!
> >
> >/Lennart
> >
> >-----Original Message-----
> >From: Kris Carlier [mailto:root@iguana.be]
> >Sent: Thursday, October 07, 1999 3:59 PM
> >To: Lennart Börjeson
> >Cc: Suse-Axp (E-mail)
> >Subject: RE: [suse-axp] How to configure X on a Multia?
> >
> >
> ># File generated by xf86config.
> >
> >[Deleted]
> >
> >--
> >To unsubscribe, e-mail: suse-axp-unsubscribe@suse.com
> >For additional commands, e-mail: suse-axp-help@suse.com
>
>
> _________________________________________________
> Izaak Bozof International Network Services
> INS/Microsoft Alliance New York City
>
> Pager: mailto:page.izaak@iname.com
> http://www.ins.com
> _________________________________________________
>
> --
> To unsubscribe, e-mail: suse-axp-unsubscribe@suse.com
> For additional commands, e-mail: suse-axp-help@suse.com
>

-- 
To unsubscribe, e-mail: suse-axp-unsubscribe@suse.com
For additional commands, e-mail: suse-axp-help@suse.com



This archive was generated by hypermail 2a22 : Thu Nov 04 1999 - 16:56:59 PST